Important Note:
Buckets with the 400 label, have been filtered through the 400 micron filter only, and they are only for these types of buckets.
Buckets with the 100 label, have been filtered through the 100 micron filter and are ready for production.
Use these labels as they should so as to not cause confusion and, or, grease being put into production without being filtered correctly.
A block agenda
B block agenda (as of Board Meeting on 11/03)
Read and understand the Right To Know book.
Possibly obtain a tabletop biodiesel processor for demonstrative purposes.
We finished putting Sam back together, now we need to test for leaks.
Possibly do a practice titration.
Figure out what to make out of the Whole Foods bags (Umbrellas? Raincoats? Blankets?)
Bring in clear plastic bottles that have not had too many chemicals in them (like soda or energy drinks) for growing algae.
Run through an "imaginary batch" of biodiesel eventually, probably with safety team.
C block agenda Last updated 10/28/10 11:40
Cleaning up the shop
Still waiting on Algae production to start. (Friday is when MIT is coming here) Some research is necessary for the new Greengineers.
Need a better way, and greener way, to fuse the plastic. By this I mean what we use to keep the Iron from direct contact with the plastic.. Springboardbiodiesel.com , 201s on production we need to go there and read about starting up the Biopro after a long period of storage.
(Gemmine)
I'm currently pulling myself away from the rest of production team to work with Drager, not sure how long this will take.
I THINK I figured out how to fix the Drager, but we are missing the data sheets that I would need. Going to need help finding them.
Also got a reading of -0.5 PPM of Methanol, didn't know that was even possible.
Production Team
Important Note:
Buckets with the 400 label, have been filtered through the 400 micron filter only, and they are only for these types of buckets.
Buckets with the 100 label, have been filtered through the 100 micron filter and are ready for production.
Use these labels as they should so as to not cause confusion and, or, grease being put into production without being filtered correctly.
A block agenda
B block agenda (as of Board Meeting on 11/03)
C block agenda Last updated 10/28/10 11:40
Cleaning up the shop
Still waiting on Algae production to start. (Friday is when MIT is coming here) Some research is necessary for the new Greengineers.
Need a better way, and greener way, to fuse the plastic. By this I mean what we use to keep the Iron from direct contact with the plastic..
Springboardbiodiesel.com , 201s on production we need to go there and read about starting up the Biopro after a long period of storage.
(Gemmine)
I'm currently pulling myself away from the rest of production team to work with Drager, not sure how long this will take.
I THINK I figured out how to fix the Drager, but we are missing the data sheets that I would need. Going to need help finding them.
Also got a reading of -0.5 PPM of Methanol, didn't know that was even possible.